Control Panel Display Menu - Blackmagic Design HyperDeck Manuel D'utilisation Et D'installation

Control Panel Display Menu

Using the Display Menu
Use your HyperDeck's control panel display menu to change your video and audio inputs and
outputs as well as any settings changes you would make in HyperDeck Setup such as trigger
recording, timecode output and your chosen recording codec.
To change a setting in the menu:
1
2
3
4
5
DISP
SET
Selecting Timecode Source
When recording from HD-SDI video sources that provide embedded SMPTE RP 188 metadata,
you can record the embedded timecode from the video source instead of using timecode
generated by your HyperDeck.
Codec
ProRes HQ
ProRes
ProRes LT
ProRes Proxy
HyperDeck Studio Mini has a list based menu, and HyperDecks that record on SSDs have a
tile based menu, so the position of some settings in the menu may appear slightly different
Press the 'display' or 'menu' button to display the main menu.
Use the jog/shuttle wheel on the front of HyperDeck to highlight different options.
Press the 'set' button to confirm a selection.
To return to a previous menu, press the 'menu' button on HyperDeck Studio Mini,
or scroll to the 'return' arrow and press 'set.
Press the 'display' or 'menu' button to exit.
Press the 'display' or 'menu' button to enter the LCD menu where you
can select between various codecs and change settings
Codec Codec
Uncomp 10-bit
Record
Trigger
ProRes HQ
ProRes
ProRes LT
ProRes Proxy
INPUT REM
JOG
DISP
SET
Codec Codec
Uncomp 10-bit
Record
Trigger
ProRes HQ
ProRes
ProRes LT
ProRes Proxy
Codec Codec
INPUT REM
Uncomp 10-bit
Record
Trigger
ProRes HQ
ProRes
ProRes LT
JOG
ProRes Proxy
Control Panel Display Menu 26