Blackmagic Design HyperDeck Manuel D'utilisation Et D'installation page 790

Comando
goto: clip id: {start/end}
goto: clip id: {n}
goto: clip id: +{n}
goto: clip id: -{n}
goto: clip: {n}
goto: clip: +{n}
goto: clip: -{n}
goto: clip: {start/end}
goto: timeline: {n}
goto: timeline: +{n}
goto: timeline: -{n}
goto: timeline: {start/end}
goto: timecode: {timecode}
goto: timecode: +{timecode}
goto: timecode: -{timecode}
goto: slot id: {n}
jog: timecode: {timecode}
jog: timecode: +{timecode}
jog: timecode: -{timecode}
shuttle: speed: {-1600 to 1600}
shuttle: speed: {-5000 to 5000}
remote
remote: enable: {true/false}
remote: override: {true/false}
configuration
configuration: video input: SDI
configuration: video input: HDMI
configuration: video input: component
configuration: audio input: embedded
configuration: audio input: XLR
configuration: audio input: RCA
configuration: file format: {format}
configuration: audio codec: PCM
configuration: audio codec: AAC
configuration: timecode input:
{external/embedded/preset/clip}
configuration: timecode preset:
{timecode}
configuration: audio input channels: {n}
configuration: record trigger: {none/
recordbit/timecoderun}
Descrição do Comando
goto first clip or last clip
goto clip id {n}
go forward {n} clips
go backward {n} clips
goto frame position {n} within current clip
go forward {n} frames within current clip
go backward {n} frames within current clip
goto start or end of clip
goto frame position {n} within timeline
go forward {n} frames within timeline
go backward {n} frames within timeline
goto start or end of timeline
goto specified timecode
go forward {timecode} duration
go backward {timecode} duration
goto slot id {n}
jog to timecode
jog forward {timecode} duration
jog backward {timecode} duration
shuttle with speed
shuttle with speed
query unit remote control state
enable or disable remote control
session override remote control
query configuration settings
switch to SDI input
switch to HDMI input
switch to component input
capture embedded audio
capture XLR audio
capture RCA audio
switch to specific file format
switch to PCM audio
switch to AAC audio
change the timecode input
set the timecode preset
set the number of audio channels recorded to {n}
change the record trigger
Informações para Desenvolvedores (em inglês) 790