If your HyperDeck has 'reverse' or 'fast forward' buttons, you can press these buttons to play
through the clip at 2x speed. Press the 'reverse' or 'fast forward' buttons again and the speed
will increase to 4x and then 8x. Once you've found the section you want to review, press 'play'
to resume normal playback.
DISP
SET
DISP
SET
On HyperDecks with fast forward and reverse buttons, press the buttons repeatedly
to gradually shuttle playback forwards and backwards at faster speeds
HDR Playback on HyperDeck Studio 12G
HyperDeck Studio 12G is capable of playing back HDR wide gamut video content. This lets you
monitor HDR video on an HDMI TV or SDI monitor. For example, you may have HDR files you
have exported from a DaVinci Resolve workstation and want to view them on a larger screen
or HDMI projector.
Your HyperDeck will automatically read the metadata in the clip file and select the
corresponding HDR output format.
While the auto setting will be successful most of the time, some files may not include the
required metadata, and this may affect how the brightest regions of your image will be
displayed. If the image does not appear as expected, you can set the correct output format
using the 'HDR' LCD menu.
To set the HDR output format:
1
Press the 'menu' button to open the LCD menu.
2
Navigate to the 'video' menu and select 'HDR'.
3
Select the video clip's corresponding HDR output format from the list. For example, if
your clip was encoded for HDR 10 using ST2084 at 2000 nits, select ST2084 (2000).
NOTE
For HDR playback to work as expected, the monitor or HDMI projector connected
to your HyperDeck Studio 12G must also be capable of displaying HDR content.
The HDR output settings available are:
Auto
Auto is the default setting that will let HyperDeck automatically select the output format
that conforms to the clip's HDR metadata.
Rec.709
For high definition video using standard dynamic range.
01:42:56:12
INPUT
REM
JOG
INPUT
REM
JOG
SSD
2
SSD
01:42:56:12
Playback
2
12