Blackmagic Design HyperDeck Manuel D'utilisation Et D'installation page 17

Brand Card Name
Angelbird AV Pro
Angelbird
Angelbird
Lexar Professional 2000x
MagicRAM MagicRAM V90
Extreme Pro
Sandisk
Extreme Pro
Extreme
Extreme Plus
Sony SF-G64
Sony
Sony SF-G128
Toshiba Exceria Pro
Wise Wise SD2
Formatting SSDs and SD Cards
Media used by HyperDeck must be formatted as either HFS+ or exFAT. These disk formats
allow long clips to be recorded as single files. You can easily format a card or SSD via the
format feature in HyperDeck's LCD menu, or via a Windows or Mac OS computer.
HFS+ is also known as Mac OS Extended and is the recommended format for HyperDeck as it
supports journaling. Data on a journaled disk is more quickly recovered in the rare event it
becomes corrupted, and less likely to be corrupted in the first place. HFS+ is natively supported
by Mac OS.
ExFAT is supported natively by Mac OS and Windows without needing to purchase any
additional software. However, exFAT does not support journaling.
While navigating through the format feature on the LCD menu, you'll have plenty of
opportunities to cancel the format and return to the previous menu by selecting the return
arrow on the bottom right of the LCD and pressing the 'set' button on the control panel, or by
pressing the menu button on HyperDeck Studio Mini. Always press the 'set' button to confirm
settings and enter setting menus.
Storage Max Read/Write Speed
128GB 300 MB/s
64GB 300 MB/s
64GB 300 MB/s
256GB 300 MB/s
128GB 300 MB/s
64GB 300 MB/s
32GB 300 MB/s
64GB 95 MB/s
32GB 95 MB/s
64GB 90 MB/s
64GB 90 MB/s
64GB 300 MB/s
128GB 300 MB/s
256GB 260 MB/s
64GB 285 MB/s
128GB 285 MB/s
Supported Formats
Ultra HD ProRes HD ProRes,
or DNxHR DNxHD or H.264
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
No Yes
No Yes
No Yes
No Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
About SSDs and SD Cards 17