File Formats
All HyperDeck models currently support the following file formats:
QuickTimeUncompressed
QuickTimeProResHQ
QuickTimeProRes
QuickTimeProResLT
QuickTimeProResProxy
QuickTimeDNxHD220
DNxHD220
HyperDeck Studio Mini and HyperDeck Studio 12G additionally support the following file formats:
QuickTimeDNxHR_HQX
DNxHR_HQX
HyperDeck Studio Mini also supports the following file formats:
H.264Low
H.264Medium
H.264High
QuickTimeDNxHD45
DNxHD45
QuickTimeDNxHD145
DNxHD145
QuickTimeDNxHR_SQ
DNxHR_SQ
QuicktimeDNxHR_LB
DNxHR_LB
Supported file formats may vary between models and software releases.
Querying and updating configuration information
The "configuration" command may be used to query the current configuration of the deck:
configuration↵
The server returns the configuration of the deck:
211 configuration:↵
audio input: {"embedded" , "XLR" , "RCA"}↵
video input: {"SDI" , "HDMI" , "component"}↵
file format: {File format}↵
↵
One or more configuration parameters may be specified to change the configuration of the deck.
To change the current video input:
configuration: video input: {"SDI" , "HDMI" , "component"}↵
Valid video inputs may vary between models. To configure the current audio input:
configuration: audio input: {"embedded" , "XLR" , "RCA"}↵
Valid audio inputs may vary between models.
To configure the current file format:
configuration: file format: {File format}↵
Note that changes to the file format may require the deck to reset, which will cause the client connection to
be closed. In such case, response code 213 will be returned (instead of 200) before the client connection
is closed:
"213 deck rebooting"
Asynchronous configuration information change notification is disabled by default and may be configured
with the "notify" command. When enabled, changes in configuration will generate a "511 configuration:"
asynchronous message with the same parameters as the "211 configuration:" message.
Informações para Desenvolvedores (em inglês)
798