Trigger Recording - Blackmagic Design HyperDeck Manuel D'utilisation Et D'installation

To set this using the display menu:
1 Press the 'display' or 'menu' button to display the main menu.
2 Scroll to the 'timecode' menu and press 'set'.
3 Press 'set' to enter the 'timecode input' menu and select 'input'.
4 Press 'set' to confirm your selection.
It might be necessary to turn on the RP 188 setting in your camera before HyperDeck will be
able to record the timecode.
HyperDeck Studio Mini features a timecode output option so you can select to output either
the timeline timecode or clip timecode.
To set the timecode output to clip timecode:
1 Press the 'menu' button to display the main menu.
2 Scroll to the 'timecode' menu and press 'set'.
3 Scroll to 'timecode output' and press 'set'.
4 Scroll to 'clip' and press 'set' to confirm your selection.
Press 'menu' to return to the main view.

Trigger Recording

HyperDeck supports trigger recording which means you can set to auto record on your
HyperDeck using either start/stop or timecode run recording. When using trigger recording
you will need to turn on the 'remote' option of your HyperDeck. On HyperDeck Studio Mini you
can turn on remote by pressing the 'menu' button to open the LCD menu, navigate to 'settings'
and set remote to 'on'. On other HyperDeck models, turn on the remote feature by pressing the
'rem' button found on the front of the panel. The button will illuminate to let you know remote
is enabled.
SDI Start/Stop Recording
HyperDeck supports start/stop recording, which means when you press the record button on
an HD-SDI camera, HyperDeck will start recording without also having to press the record
button on your HyperDeck disk recorder.
NOTE You will need a camera that can trigger the record function of HyperDeck via
HD-SDI. Cameras which support trigger recording via HD-SDI may include menu
options such as 'trigger rec', 'HD-SDI remote I/F' or 'SDI remote start/stop trigger'.
To set start/stop trigger recording using the display menu:
Press the 'disp' or 'menu' button to display the main menu.
1 Scroll to the 'record' menu and press 'set'.
2 Scroll to the 'record trigger' menu and press 'set'.
3 Select 'SDI start/stop' and press 'set' to confirm your selection.
Press 'disp/menu' to exit.
Control Panel Display Menu 27