Hyperdeck Status Indicators - Blackmagic Design HyperDeck Manuel D'utilisation Et D'installation

Rec.2020 SDR
This setting is used for Ultra HD video using standard dynamic range.
HLG
HLG stands for 'hybrid log gamma'. This format allows HDR video to be played back on
HDR capable TVs and monitors, including those that support up to Rec.2020 SDR.
The following settings support the Rec.2020 color gamut, plus PQ, or perceptual quantizer
published as SMPTE ST2084. PQ is the function of wide gamut HDR that allows for the display
of brighter images. Luminance values in candelas per meter squared, for example 1000 cd/m
indicate the maximum luminance per square meter supported by the corresponding format.
ST2084 (300)
300 cd/m 2 luminance.
ST2084 (500)
500 cd/m luminance.
2
ST2084 (800)
800 cd/m luminance.
2
ST2084 (1000)
1000 cd/m 2 luminance.
ST2084 (2000)
2000 cd/m luminance.
2
ST2084 (4000)
4000 cd/m luminance.
2

HyperDeck Status Indicators

Status Indicators
When recording or playing video with HyperDeck, any information you need to know is
displayed on the unit itself via LED indicators for each media slot and the built in LCD.
Media Slot Indicators
When you first power on HyperDeck, or any time you insert an SSD or SD card, the slot
indicator will illuminate green while checking the media and then switch off. If the disk has
not been formatted correctly, or fails to work, the slot will illuminate solid red until the disk is
removed. In this case, check if the disk is formatted correctly and also check that it works
with a computer.
HyperDeck's media slot indicators illuminate to let you know the status of the disk,
for example red when recording, and green during playback
2160p30
Card 2
01:23:47:08
2
2160p30
01:23:47:0
HyperDeck Status Indicators
Ca
13