Smart Panel Features; Status Indicators - Blackmagic Design Teranex Mini IP Video 12G Manuel D'installation Et D'utilisation

Smart Panel Features

LCD Display
The home screen is the first feature you'll see on your Teranex Mini Smart Panel's LCD display.
It displays important information, including the source video format, custom name for the unit,
source timecode, and status indicators.
1 MENU
1 MENU
Source video format
– The format and
2 VIDEO
frame rate of your video
source connected or
routed to your Teranex
2 Mini IP Video 12G VIDEO
SET AUDIO
SET AUDIO

Status Indicators

Indicators on the LCD will show you the current status of the video signal, network connection,
and supported data rate.
Network
00 : 00 : 00 : 00
Locking ...
00 : 00 : 00 : 00
No Video
00 : 00 : 00 : 00
Data rate
00 : 00 : 00 : 00
Timecode – The timecode
embedded in the video source
2160p59.94
01 : 23 : 47 : 08
2160p59.94
1 MENU
01 : 23 : 47 : 08
2 VIDEO
SET AUDIO
Video monitor – Displays the source video
If the network is not detected, 'network' will be displayed
IP Video 12G
on the LCD screen. Check the unit's network settings, and
also check the network cable is properly locked into the
Ethernet connectors and firmly seated.
After the network is successfully connected, you will see
IP Video 12G
the 'locking' indicator as the unit locks to the PTP clock of
your network switch. Depending on the network you are
connecting to, it may take a short period of time to lock.
Once locked to the network switch, the unit will look for a
IP Video 12G
video signal. If a video signal from the SDI source or
Ethernet connection is not detected, 'no video' will be
displayed on the LCD screen. Check the SDI source cable
is properly connected.
If the data rate of your SDI source signal is too high for
IP Video 12G
transmission through the selected Ethernet port, 'data rate'
will be displayed on the LCD screen. Try changing the
source to an HD signal if using the 1G Ethernet port, or
install an optional 10G Ethernet optical fiber SFP module
for Ultra HD.
IP Video 12G
Device name – The name
that you have entered for
2160p59.94 IP Video 12G
IP Video 12G
01 : 23 : 47 : 08
the unit in the 'about' tab
Audio meters – Displays the
audio levels of your video
source connected to your
Teranex Mini IP Video 12G
Settings 20 20