Transverse Link And Shock Absorbers Front - Reely ROAD 23 72 11 Notice D'emploi

d) Transverse Link and Shock Absorbers Front
AA
VQ
Assembly looks more difficult than it actually is. Important: Proceed in the right order; otherwise, the parts may have to
be disassembled again.
• First take the two transverse link bars. They have a different
length:
Front = „VQ" (front transverse link bar)
Rear = „HQ" (rear transverse link bar)
Do not swap the bars. Otherwise, the front transverse
link cannot be secured properly!
• Secure the two lower front transverse links „Q1" to the chassis
with the front transverse link bar „VQ". Observe correct alignment;
see figure to the right (observe shape of holes in the transverse
link).
• Then screw the front fender bar „VR" to the chassis with two
tapping screws „S1". The fender bar is also used for securing the
transverse link bar „VQ".
Q2
S7
ASH
DF
RA
MS3
S6
Q1
ST3
LAS
K6
K6
ST2
KK1
LA
L
R
RF
MT
HQ
Q1
VR
RM
VQ
Q1
S1
57