Reely ROAD 23 72 11 Notice D'emploi page 56

• Last, attach the metal rings „MR1" at the top and bottom of the
steering arms „LH1" and „LH2".
• The steering mechanics assembled this way must be attached
to both metal axles „MA1"; see figure to the right.
• Use two recessed head tapping screws „S2" to attach the front
differential to the chassis from below.
• Then attach the front differential to the chassis from above with
two tapping screws „S1".
Ensure that the upper ends of the two metal axles „MA1" are
correctly placed in the guiding holes of the front differential; see
arrow in the figure to the right.
56
S2
S1
S1
S1