Boston Scientific Avista MRI Mode D'emploi page 15

Instructions for Use
36. Remove the extension, being careful not to contact non-sterile portions to the patient's body.
Figure 16: Removal of Lead Extensions
37. Loosen the extension connector setscrew using the hex wrench. Disconnect and remove the connector
without moving the implanted lead.
Note: Lead extensions, adapters, and splitters are not full-body MRI scan eligible.
38. Proceed to the IPG Implantation instructions in the IPG Directions For Use for your SCS System.
Avista™ MRI xxcm Contact Lead Kit
90951714-02 REV A 11 of 317