To Reset Parameters To Default - Stryker XPRT 2950 Manuel D'utilisation

ADVANCED SETTINGS (CONTINUED)

TO RESET PARAMETERS TO DEFAULT

Selecting "Reset Parameters" returns the Rotation
angles and hold times, Percussion/Vibration intensity,
duration, frequency and lung selection, support surface
firmness level and the alarm silence timer to the system
default settings .
1 . Select .
2 . Select the "Reset" button .
3 . Select the "Parameters" button .
4 . Select the "Ok" button to reset all therapy
parameters to the default settings . Or select
"Cancel" to retain the current parameters .
Note:
The selected language and alarm tones are not
reset .
www.stryker.com
Operation Guide
2950-109-005 REV B
Return To Table of Contents
1-31
English