To Adjust Support Surface Firmness - Stryker XPRT 2950 Manuel D'utilisation

TO ADJUST SUPPORT SURFACE FIRMNESS

Support surface firmness settings may be adjusted for patient comfort requirements . The default value of 18 will
provide optimal pressure redistribution for patients up to 220 pounds . Position the patient to achieve optimal immersion
and envelopment .
Correct Firmness Setting
1 . With the patient in the supine position, select the
"Firmness" button .
2 . Adjust the settings as needed by increasing (+) or
decreasing (-) the firmness .
3 . Select the "Ok" button .
PATIENT POSITIONING
Align the patient's shoulders with the graphic indicator on the side of the support surface .
www.stryker.com
Operation Guide
2950-109-005 REV B
Incorrect Firmness Setting
Return To Table of Contents
English
1-25