Percussion Therapy; To Start Percussion Therapy - Stryker XPRT 2950 Manuel D'utilisation

PERCUSSION THERAPY

WARNING
• Always secure the support surface straps to the bed frame to prevent the support surface from sliding and to prevent
patient injury .
• Risk of injury . Use of XPRT therapeutic support surface for stroke victims should be only under physician's order .
• To avoid possible injury, when using rotation or pulmonary therapy, take care not to extubate intubated patients .
• To ensure patient safety, always raise the bed siderails before beginning therapy .
• To avoid possible injury and to assure proper operation when using the XPRT™ therapeutic support surface on a
bed frame equipped with scales or bed exit follow manufacturer's instructions for use of these options .
• To avoid possible injury do not zero bed scales or weigh patient with Percussion, Vibration, Rotation or Turn Assist
active . Patient motion and position resulting from the therapeutic support surface may adversely affect scale
system performance .
• To avoid possible injury do not initialize "Arm" bed exit with Percussion, Vibration, Rotation or Turn Assist active . The
patient motion and position resulting from the support surface may adversely affect bed exit system performance .

TO START PERCUSSION THERAPY

1 . Select the "Percussion" button .
2 . Adjust the therapy parameters as needed, then
select the "Start" button .
a) Increase or decrease the frequency of
percussion .
b) Increase or decrease the duration of the
therapy .
c) Increase or decrease the intensity of
percussion .
d) Select both lungs "bilateral" or either the left
or the right lung to receive treatment .
The screen will display "Percussion Started" . The screen
will then display "Preparing Percussion" while the system
is optimizing surface pressures for patient therapy .
www.stryker.com
Operation Guide
2950-109-005 REV B
Return To Table of Contents
1-19
English