To Start Turn Assist - Stryker XPRT 2950 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 77
English
WARNING
• To avoid possible injury and to assure proper operation when using the XPRT™ therapeutic support surface on a
bed frame equipped with scales or bed exit follow manufacturer's instructions for use of these options .
• To avoid possible injury do not zero bed scales or weigh patient with Percussion, Vibration, Rotation or Turn
Assist active . Patient motion and position resulting from the support surface may adversely affect scale system
performance .
• To avoid possible injury confirm proper scale system operation following support surface installation . For best
results, secure the XPRT™ therapeutic support surface power cord to prevent damage to the cord and interference
with the bed frame and the scale system .
• To avoid possible injury do not initialize "Arm" bed exit with Percussion, Vibration, Rotation or Turn Assist active . The
patient motion and position resulting from the support surface may adversely affect bed exit system performance .
• To avoid possible injury confirm proper bed exit system operation when used in conjunction with Percussion,
Vibration, Rotation and Turn Assist .

TO START TURN ASSIST

1 .
Select the "Turn Assist" button .
2 .
Select the direction to turn the patient .
a) By selecting the (R) the patient's right side
raises .
b) By selecting the (L) the
patient's left side raises .
WARNING
Do not leave the patient unattended during Turn Assist .
Serious injury could result .
Note:
The Rotation, Percussion, Vibration, Max Inflate
and Firmness buttons are all inactive when Turn Assist
is active .
Return To Table of Contents
1-26
Operation Guide
2950-109-005 REV B
www.stryker.com

Publicité

Table des Matières
loading

Table des Matières