To Start Rotation Therapy - Stryker XPRT 2950 Manuel D'utilisation

TO START ROTATION THERAPY

1 . Select the "Rotation" button .
2 . Adjust the therapy parameters as needed, then
select the "Start" button . Rotation starts .
a) Increase or decrease patient right side
rotation angle .
b) Increase or decrease patient left side rotation
angle .
c) Increase or decrease patient right side
rotation hold time .
d) Increase or decrease patient supine/rotation
hold time .
e) Increase or decrease patient left side rotation
hold time .
f) Set rotation rate (speed) .
f1) Increase or decrease rotation rate (speed) .
f2) Select the "OK" button .
3 . Verify the bed siderails are raised and
the patient is centered on the support
surface . Select the "Confirm" button .
Note:
• The Rotation Therapy session continues until
stopped or paused .
• All Therapy parameters are stored until changed or
reset .
• To reset the parameters to the default values, refer
to "Advanced Settings" on
www.stryker.com
Operation Guide
page 1-29 .
2950-109-005 REV B
Return To Table of Contents
1-17
English