Publicité
Once the procedure has been started
•
First STEP: the panel must be positioned at a distance of 170 cm from the camera, which
corresponds to 50 cm from the front bumper. The height of the panel's lower edge MUST BE
90 cm.
•
Second STEP: the front bumper–panel distance must change to 150 cm.
•
Wait for the procedure to complete.
NOTE: The diagnosis equipment can complete the calibration even if the distances are not observed,
but in this case the system will not operate correctly.
Possible system failures:
•
Both Driving Advisor warning lights on
•
Failure message on instrument panel when the traffic signs are read
•
Incorrect indications, activation of one of the LDW warning lights or failure to indicate due to
parallel positioning errors during the calibration procedure.
R
. 0
EV
A
. T
LL RIGHTS RESERVED
HE CIRCULATION AND REPRODUCTION OF ALL OR PART OF THIS GUIDE BY ANY MEANS IS PROHIBITED
NEW DUCATO
.
Publicité
