Publicité
Warning : In the event of poor visibility, such as fog or heavy rain, for example, the performance of the
system may decrease.
D
A
RIVING
DVISOR CALIBRATION
Calibration must be carried out in two cases:
1 – windscreen replacement
2 – control unit replacement
To carry out calibration, it is necessary to acquire a panel (specific equipment with which the network
will be provided) and initiate a procedure with the diagnosis equipment.
NOTE: If the control unit is removed/refitted, no action is required, since the calibration is not lost.
Calibration MUST be carried out in observance of the following conditions:
•
Vehicle unladen
•
Air suspension at level 0 (if present); otherwise, does not operate
•
Comply with the distances indicated below
•
During the movement of the stand between the first and second distance, make sure that the
panel does not move from the stand mounting
The panel shown in the following image is required to carry out calibration.
R
. 0
EV
A
. T
LL RIGHTS RESERVED
HE CIRCULATION AND REPRODUCTION OF ALL OR PART OF THIS GUIDE BY ANY MEANS IS PROHIBITED
NEW DUCATO
.
Publicité
