Publicité
T
S
RANSFORMER
OCKET
The transformer socket (or "bodywork socket") is available as an optional component and has the
function of facilitating the conversion of the vehicle by coach work fitters for multiple requirements,
providing the repetition of various signals, including the two B-CAN cables.
OPTIONAL WIRING MODULE (MCA)
The Optional Wiring Module (MCA) or additional system fuse box is used in vehicle versions with
robotised gearbox and for the ambulance and minibus versions.
It incorporates the protective fuses for the additional Webasto heater
CAN (TUM)
/
GATEWAY FOR FITTER
INSTALLER VERSIONS
Fitters/installers needed to fit some electronic devices not compatible with those installed in factory,
this resulted in the need to use the CAN (CAN-B and CAN-C) gateways between the applications
typical of Fiat Auto (FGA) and the world of FMS (Fleet Management System Interface).
The FMS interface is a standard system, developed by the main European manufacturers of
commercial vehicles to make possible computerised applications, independent of the manufacturers.
The TUM control unit is therefore an interception and storage device for data and signals (sniffer),
used as a gateway between CAN-B and CAN-C of the vehicle and FMS interface.
R
. 0
NEW DUCATO
EV
A
. T
.
LL RIGHTS RESERVED
HE CIRCULATION AND REPRODUCTION OF ALL OR PART OF THIS GUIDE BY ANY MEANS IS PROHIBITED
Publicité
