Operating Status; Configuration Of The Keys - Burkert TopControl Basic 8694 Manuel D'utilisation

Type 8694
Controlanddisplayelements
7.3 Configuration of the keys
The configuration of the 2 keys varies depending on the operating status (AUTOMATIC / MANUAL).
The description of the operating statuses (AUTOMATIC / MANUAL) can be found in the chapter entitled "7.1

Operating status".

Version 1
Key 1
Key 2
Figure 13: Description of the buttons
NOTE!
Breakage of the pneumatic connection pieces due to rotational impact.
▶ When unscrewing and screwing in the body casing or transparent cap, do not hold the actuator of the pro-
cess valve but the connection housing.
→
To operate the buttons, for
Version 1: unscrew the body casing
Version 2: unscrew the transparent cap
Version 1
Figure 14: Open positioner
Version 2
Key 1
Transparent cap
Body casing
Connection housing
Actuator
Key 2
Version 2
english
27