Led Status Display - Burkert TopControl Basic 8694 Manuel D'utilisation

11.6 LED status display
NOTE!
Breakage of the pneumatic connection pieces due to rotational impact.
▶ When unscrewing and screwing in the body casing, do not hold the actuator of the process valve but the
connection housing.
The LED status display indicates the bus status (LED green and red).
Figure 40: LED status display AS-Interface
LED green LED red
off off
off on
on off
flashing on
off flashing
flashing flashing
Table 24: LED Status Display AS-Interface
Figure 41: Position of the seal in the body casing
54
POWER OFF
No data traffic (expired Watch Dog at slave address does not equal 0)
OK
Slave address equals 0
Electronic error or external reset
Timeout bus communication after 100 ms (periphery error)
english
Bus LED green
Bus LED red
Body casing
Seal
body casing
Connection housing
Type 8694
AS-Interfaceinstallation