Technical Data; Conformity; Standards; Licenses - Burkert 8692 Guide Rapide

Type 8692, 8693
Technicaldata
6 TECHNICAL DATA
6.1

Conformity

Types 8692/8693 conform to the EC directives according to the EC
Declaration of Conformity.
6.2

Standards

The applied standards which are used to demonstrate compliance with
the EC Directives are listed in the EC-Type Examination Certificate and/
or the EC Declaration of Conformity.
6.3

Licenses

The product is approved for use in zone 2 and 22 in accordance
with ATEX directive 94/9/EC category 3GD.
Observe instructions on operation in an explosion-risk (Ex)
area. Observe the ATEX additional instructions.
The product is cULus approved. Instructions for use in the UL area
see chapter "6.8 Electrical data".
6.4 Operating conditions
WARNING!
Solar radiation and temperature fluctuations may cause mal-
functions or leaks.
▶ If the device is used outdoors, do not expose it unprotected to
the weather conditions.
▶ The permitted ambient temperature may not exceed the maxi-
mum value or drop below the minimum value.
Ambient temperature: The permitted temperature range is given
on the rating plate of the device.
Degree of protection
Evaluated by the manufacturer:
IP65 / IP67 according to EN 60529 *
* only if cables, plugs and sockets have been connected correctly and in
compliance with the exhaust air concept (see Chapter "10.5 Pneumatic
connection", page 20).
6.5 Rating plate
Explanation of the device-specific specifications on the rating
plate:
Type; features of the type code applicable to UL
and ATEX
Example:
8692 -E3-...-0 PU02
Single act Pilot 3.0 24V
Pmax 7 bar
Tamb -10 - +55°C
S/N 1001
00123456
W15 MA
Fig. 3: Example of rating plate
English
Evaluated by UL:
UL Type 4x Rating *
Control function; pilot valve
Supply voltage pilot valve
Maximum operating
pressure
Max. ambient temperature
Serial number / CE mark
Identification number; date
of manufacture (encoded)
Bar code
9