Control And Display Elements - Burkert TopControl Basic 8694 Manuel D'utilisation

The positioner features 2 buttons, 4-pole DIP switches and 2x 2-colored LEDs as a display element.
NOTE!
Breakage of the pneumatic connection pieces due to rotational impact.
▶ When unscrewing and screwing in the body casing or transparent cap, do not hold the actuator of the pro-
cess valve but the connection housing.
→
To operate the buttons and DIP switches, for
Version 1:
Version 2:
Figure 11: Open positioner
Figure 12: Position of the seal in the body casing
→
Version 1:
Check that the seal is correctly positioned in the body casing.
NOTE!
Damage or malfunction due to penetration of dirt and humidity.
▶ To observe degree of protection IP65 / IP67, screw the transparent cap in all the way.
→
Close the device (assembly tool: 674077
The assembly tool (674077) is available from your Bürkert sales office.
6)
26
unscrew the body casing
unscrew the transparent cap
Transparent cap
Body casing
Connection housing
Actuator
Version 1
).
6)
english
Body casing
Seal
body casing
Connection housing
Type 8694
Controlanddisplayelements
Version 2