Burkert TopControl Basic 8694 Manuel D'utilisation page 59

Type 8694
Start-up
NOTE!
Breakage of the pneumatic connection pieces due to rotational impact.
▶ When unscrewing and screwing in the body casing or transparent cap, do not hold the actuator of the pro-
cess valve but the connection housing.
→
To operate the DIP switches, for
Version 1: unscrew the body casing
Version 2: unscrew the transparent cap
Version 1
Figure 46: Open positioner
Version 1
Figure 47: Automatic adjustment X.TUNE
→
Start the X.TUNE by pressing button 1
While the X.TUNE is running, LED 1 flashes quickly (green).
When the automatic adjustment is complete, LED 1 flashes slowly (green)
The changes are automatically transferred to the memory (EEPROM) provided the X.TUNE function is successful.
Important: When the X.TUNE function is activated, the actuator cannot be actuated via the AS-Interface
communication.
The X.TUNE can also be started via communications software.
20)
If a fault occurs, LED 1 is lit red.
21)
Transparent cap
Body casing
Connection housing
Actuator
LED 1
LED 2
LED 1
Key 2
Key 1
LED 2
DIP Switches
Communications
interface
Key 1
Key 2
for 5 s.
20)
Version 2
Communications interface
ON DIP
1 2 3 4
.
21)
english
Version 2
59