Burkert TopControl Basic 8694 Manuel D'utilisation page 80

2. Electrical connection
DANGER!
Risk of electric shock.
▶ Before working on equipment or device, switch off the power supply and secure to prevent reactivation.
▶ Observe applicable accident prevention and safety regulations for electrical equipment.
Circular plug-in connector:
→
Loosen the circular plug-in connector.
Cable gland:
→
Open the positioner: unscrewing the body casing in an anticlockwise direction.
→
Unscrew the screw terminals and pull out cables.
→
Close the positioner.
3. Mechanical connection
→
Loosen the fastening screws.
→
Remove the positioner upwards.
Figure 59: Disassembly the positioner
80
Positioner
Pneumatic
connections
Actuator
Series 21xx
english
Type 8694
Disassembly
Electrical con-
nection cir-
cular plug-in
connector
Fastening
screws (2x)
Pneumatic
connection to
the actuator
Actuator
Series 20xx