Electrical Installation 24 V Dc; Safety Instructions; Electrical Installation With Circular Plug-In Connector; Designation Of The Contacts Type 8694 - Burkert TopControl Basic 8694 Manuel D'utilisation

10 ELECTRICAL INSTALLATION 24 V DC
All electrical inputs and outputs of the device are not galvanically isolated from the supply voltage.
Two kinds of connections are used for the electrical bonding of the positioner:
• Cable gland
with cable gland M16 x 1.5 and screw-type terminals
• Multi-pole
with circular plug-in connector M12 x 1, 8-pole
10.1 Safety instructions
DANGER!
Risk of electric shock.
▶ Before working on equipment or device, switch off the power supply and secure to prevent reactivation.
▶ Observe applicable accident prevention and safety regulations for electrical equipment.
WARNING!
Risk of injury from improper installation.
▶ Installation may be carried out by authorized technicians only and with the appropriate tools.
Risk of injury from unintentional activation of the system and an uncontrolled restart.
▶ Secure system from unintentional activation.
▶ Following installation, ensure a controlled restart.
10.2 Electrical installation with circular plug-in connector
DANGER!
Risk of electric shock.
▶ Before working on equipment or device, switch off the power supply and secure to prevent reactivation.
▶ Observe applicable accident prevention and safety regulations for electrical equipment.
10.2.1 Designation of the contacts Type 8694
View without body
casing
Figure 36: Circular plug M12 x 1, 8-pole
46
english
Type 8694
Electricalinstallation24VDC
5
Circular plug
4
6
M12 x1, 8-pole
7
3
8
2
1