ZANOLLI SYNTHESIS 06/40V E Mode D'emploi page 64

5.4 PROGRAMMING
The operating parameters programmed by the user are:
where:
A= cooking time (mm:ss)
B= set temperature (°C)
C= the percentage of ignition of top heating elements (%)
D= the percentage of ignition of bottom heating elements (%)
These parameters are normally indicated on the display when the
oven is on and can be set with the oven on or off.
Press the programming access key
enter programming mode and move from
one parameter to the next.
The parameter being programmed flashes
on the display in a horizontal line at the
bottom.
To change the value, use the keys
increase and
By keeping the key pressed you increase
the speed of data change.
If no key is pressed for more than 5
seconds, the displayed value is memorised
and the oven automatically leaves the
programming mode.
During programming the keys
The order of programming is as follows:
1) Cooking time
2) Temperature
3) Top heating elements
4) Bottom heating elements
22
to decrease.
SYNTHESIS 06/40V E
to
to
and are deactivated.
OPERATION