ZANOLLI SYNTHESIS 06/40V E Mode D'emploi page 62

OPERATION
5.3 SETTINGS
5.3.1 Cooking time adjustment
The desired cooking time is set directly by the
user, relating to the relative speed of mesh
progress automatically controlled by the
electronic circuit board.
When the oven is switched on, the mesh is
inactive and the cooking time flashes on the
display.
Press the mesh start/stop key to activate the
mesh.
Mesh movement can be activated or deactivated at any time using the key
.
When the mesh is inactive, the cooking time flashes.
When the oven is on, the mesh can be manually adjusted to reach
maximum speed by pressing the key for 4 seconds.
Press the same key again to return to the previous setting.
See the "programming" paragraph to set the cooking time.
5.3.2 Temperature adjustment
The oven temperature can only be adjusted
when the oven is on.
The oven heats up to and then remains at the
set temperature until it is switched off.
When the oven is on, the real temperature of
the cooking chamber is indicated; press the
parameter value increase key to display
the set temperature.
See the "Programming" paragraph to learn how to adjust the set
temperature.
5.3.3 Top and bottom power adjustment
To heat up of the oven , modulate the ignition of the top and bottom
heating elements according to the selected power percentage, as
explained hereunder.
20 SYNTHESIS 06/40V E