To avoid damage, place protective material between the forks
and the unit.
In all situations, to avoid unpredictable movement, be aware of
the equipment's centre of mass.
Take care that children do not play with the packaging materials
(e.g., plastic sheeting and Styrofoam): suffocation danger!
4.4 POSITIONIG THE UNIT ON ITS BASE
Position the oven by sliding it
into the four corners of the
basement (Fig.2).
4.5 POSITIONING STACKED UNITS
NO MORE THAN 3 UNITS SHOULD BE STACKED ONE ON TOP
OF THE OTHER
Once the first oven has been positioned on the base (see previous
paragraph), proceed as follows:
1-
Stack the second and the third units up one at a time, lining up the
external walls of the ovens
4.6 ELECTRICAL CONNECTION
Before making any connection, check that the specifications of the
electrical supply to which the equipment must be connected, correspond to
12
SYNTHESIS 06/40V E
INSTALLATION
2