4 INSTALLATION
ATTENTION: these installation instructions are for the
exclusive use of personnel qualified for the installation and
maintenance
of
professional use in the foodservice industry and community catering
operations. An installation carried out by unqualified persons could
cause damage to the oven, to people, animals or property.
ATTENTION: Proceed with the installation according to those
norms in force in the country where it is being carried out.
In addition, where it is necessary to carry out modifications or adaptations to
the electrical or gas systems of the building in which the oven will be
installed, whoever carries out such modifications must certify that the work
has been undertaken according to current "best practices".
4.1 CHECKING ON DELIVERY
Unless otherwise agreed, the products are carefully packaged in a robust
structure in wood and with a sheet of nylon bubble wrap giving protection
against knocks and humidity during transport. These are consigned to the
freight operator in the best of condition.
We recommend, however, that you to check the packaging on arrival for
any signs of damage. If damage has occurred, have it noted on the receipt
which must be signed by the driver.
Once the equipment has been unpacked, check that it has not suffered
damage. Also check that all the dissembled parts are present.
In the event of damage to the equipment and/or missing parts, bear in
mind that the freight operator can only accept claims within 15 days of
delivery and that the manufacturer cannot be held responsible for damage
incurred to its products during their delivery. We are however, available to
assist you in presenting your claim.
In the event of damage do not try to use the equipment and
consult with professionally qualified personnel.
4.2 CHOOSING A PLACE FOR INSTALLATION
An effective, safe and long lasting functioning of the appliance also
depends on the position in which it is installed. For this reason, it is
advisable to carefully consider where to install the equipment before it is
delivered
10
electrical
and
SYNTHESIS 06/40V E
gas
equipment
INSTALLATION
conceived
for