ZANOLLI SYNTHESIS 06/40V E Mode D'emploi page 63

OPERATION
The modulation consists in the ignition of the heating elements for a
fixed time, on a period of 45 seconds in total.
For example if the value 20% is selected, the heating elements will be
fed cyclically for 9 seconds each 45.
To avoid that heating elements are switched on at the same time, the top
elements are on at the beginning of the period, while the bottom
elements are on at the end.
For instance, if the value 30% is selected for the top heating elements,
and the value 20% is selected for the bottom heating elements, the
working cycle is effected as shown below:
4,5 9 13.5 18 22.5 27 31.5 36 40.5 45
Sec.
ON OFF TOP
OFF NO BOTTOM
On the display you can read the percentage of ignition of the heating
elements (A%=top heating elements, left / B%=bottom heating elements,
right)
When the heating elements are switched on, on the display the indicator
(C) is shown.
If the value 0% is selected, the relevant group of heating elements never
turns on.
See the paragraph "Programming" to learn how to set the power
parameters of top and bottom heating elements and how to set
the cooking time.
21 SYNTHESIS 06/40V E