Agilent Technologies Turbo-V Remote Panel Notice De Mode D'emploi page 292

17 Technical Information
How to use by Remote I/O
How to use by Remote I/O
How to use in Serial Mode
292/304
1. Power ON the controller
2. Press the "COUNTERS" and "MEASURES" button toghether.
3. Select MODE = REMOTE from the "INPUT/OUTPUT" menu
4. Exit from configuration menu
5. Connection example:
1. Power on the controller
2. Connect the serial cable
3. Select by front panel if you want to work in 232 or 485, and if
necessary, the serial address.
4. Select SERIAL from the INPUT/OUTPUT menu
5. Open the T+ software (see orderable parts table)
6. Ready to operate by SERIAL connections.
Turbo-V Remote Panel User Manual / 87-900-987-01 (E)