Agilent Technologies Turbo-V Remote Panel Notice De Mode D'emploi page 257

Data Type
Logic (L)
Numeric (N)
Alphanumeric
(A)
The addressed SLAVE will respond with an ANSWER whose
structure depends from the MESSAGE type. When the MESSAGE is a
reading command, the SLAVE will respond transmitting a string with
the same structure of the MESSAGE.
Using the RS 485 interface, the message structure remains identical to the one
NOTE
used for the RS 232 interface, the only difference being that the value assigned
to the ADDRESS <ADDR>.
Turbo-V Remote Panel User Manual / 87-900-987-01
Field Length
1
6
10
<ETX> (End of transmission) = 0x03
<CRC> = XOR of all characters subsequent to <STX> and
including the <ETX> terminator. The value is hexadecimal coded
and indicated by two ASCII character.
Technical Information
Window Protocol Description
Valid Characters
'0' = OFF
'1' = ON
'-', '.', '0' . . . '9' right
ustified with '0'
from blank to '_' (ASCII)
(E)
17
257/304