Agilent Technologies Turbo-V Remote Panel Notice De Mode D'emploi page 251

J5 – Gauge Conncetor
This connector is available to connect "EyeSys Mini-IMG" gauge and
EyeSys ConvecTor® gauge with their cables (see ordering parts table).
The pressure can be read by display or by serial line (win. 224) or by
REMOTE I/O on Programmable Analog Out (in this case the Remote
Panel replicates the signal coming from the gauge).
Figure 17
The Mini-IMG gauge is intended for high vacuum use, so with pressure above
NOTE
50 mTorr the signal is misinterpreted and a "false" pressure is displayed. Use a
transition gauge to understand if the reading is really under 50 mTorr or not.
Turbo-V Remote Panel User Manual / 87-900-987-01
SIGNAL COMMON
COMMON
IDENTIFICATION
Gauge Connector
Technical Information
J5 – Gauge Conncetor
+25VDC P MAX 2W
SIGNAL
(E)
17
251/304