ADJUSTMENT OF THE CONTROL LEVER AND FRONT BRAKE
FLUID LEVEL CHECK
The lever (1) can be adjusted (4 settings available) to
suit the rider's hand size. To decrease the lever (1) di-
stance from the handgrip, turn the adjuster screw (2)
COUNTER CLOCKWISE "A".
Fluid level inside master cylinder tank shall never be
below the min. level (3) indicated on the transparent
tank (4).
A decrease of the fluid level will let air into the system,
hence an extension of the lever stroke.
A
2
SPECIFICATIONS - OPERATION - MAINTENANCE
EN - 30
All manuals and user guides at all-guides.com
WARNING*: If the brake lever feels
mushy when pulled, there may be air in
the brake lines or the brake may be de-
fective. Since it is dangerous to operate
the motorcycle under such conditions,
have the brake system immediately
checked by the Husqvarna Dealer.
CAUTION*: Do not spill brake fluid onto
any painted surface or light lens.
1
CAUTION*: Do not mix two brands of flu-
id. Completely change the brake fluid in
the brake system if you wish to switch
to another fluid brand.
CAUTION*: Brake fluid may cause irrita-
tion. Avoid contact with skin or eyes. In
case of contact, flush thoroughly with
water and call a doctor if your eyes
were exposed.
4
MAX
MIN
3