DIGITAL DASHBOARD, WARNING LIGHTS
The motorcycle is fitted with a digital dashboard on which
3 warning lights are also available: high beam, turning
indicators and fuel reserve.
1- BLUE warning light "High beam"
2- GREEN warning light "Turning indicators"
3- ORANGE warning light "Fuel reserve"
When the ignition key is turned to the IGNITION position,
the dashboard display lights up (amber colour).
NOTES
- At every connection with the battery, the dashboard
shows the version of the test SW for the first 2 seconds;
after the check routine, the dashboard shows the last
planned function.
- When the engine is turned off, the dashboard does not
show any functions.
- To select dashboard functions and reset functions, use
the SCROLL button (A).
1
2
SPECIFICATIONS - OPERATION - MAINTENANCE
EN - 12
All manuals and user guides at all-guides.com
- The functions, which can be selected in this sequence,
are as follows:
1- SPEED / ODO (figure 1)
2- SPEED / CLOCK (figure 2)
3- SPEED / TRIP (figure 3)
4- SPEED / LAP TIMER (figure 4)
5- SPEED (figure 5)
1- SPEED / ODO (figure 1)
.................
IMPORTANT: In the event of a FUEL INJECTION SYS-
TEM MALFUNCTION, the word FAIL appears on the right
side of the dashboard display: When this is the
case, contact your HUSQVARNA dealer.
3
A
1- SPEED (Km/h or mph) / ODO (figure 1)
- SPEED: vehicle speed - maximum value: 299 Km/h or
299 mph;
- ODO: odometer- maximum value: 99999 km or
62136.50 mi;
To change unit from kilometres to miles or miles to kilo-
metres, proceed as follows:
1) set to figure 1, turn the key to OFF and push SCROLL (A).
2) place the ignition key in the IGNITION position and
hold down the SCROLL button (A) until the word
"Km/h" is displayed.
3) the display will now alternate between "Km/h" and
"Mph Miles", push the SCROLL button (A) again while
the desired unit is displayed.
A