Selecting The Operating Mode; Selecting The Process (Magic Wave 1700 / 2200) - Fronius TransTig 2200 Instructions De Service

Selecting the
operating mode
-
Selecting the
process (Magic
Wave 1700 /
2200)
-
Warning! An electric shock can be fatal. As soon as the mains switch is shifted
into the "I" position, the tungsten electrode of the TIG welding torch is live. Make
sure that from this moment on, the tungsten electrode does not touch any
persons or electrically conducting or grounded (earthed) parts such as the
housing, etc.
Shift the mains switch (20) into the "0" position - all the indicators on the control
panel now briefly light up
(2)
(3)
(1)
Note! With the TransTig 2200 power source, and when the DC- welding
process is selected, do not use any pure tungsten electrodes (colour-coded
green) .
Press the "Process" button (6) to select:
AC welding process or
AC welding process with activated cap-shaping function or
DC welding process
34
Press the "Mode" button (1) to select
either:
- 2-step mode (2) or
- 4-step mode (3)
Note! Do not use any pure tungsten
electrodes (colour-coded green) on the
TransTig 2200 power source.