Connections, Switches And System Add-Ons; Power Source - Fronius TransTig 2200 Instructions De Service

Connections, switches and system add-ons

Power source

Fig.5
(16)
(17)
(18) LocalNet connection socket ... standardised connection socket for system add-
(19) Torch control connection socket ... for connecting the control plug of a
(20) Mains switch ... for switching the power source on and off
(21) Mains cable with strain-relief device
(22) Shielding gas connection socket
Front view
(18) (19)
(17) (16)
Connections and switches on MagicWave 2200 power source (as example)
current socket with bayonet latch ... for
- connecting the welding cable of the TIG welding torch
- connecting the electrode (or grounding/earthing) cable in rod electrode (MMA)
welding, depending on the type of electrode being used
current socket with bayonet latch ... for
- connecting the grounding (earthing) cable in TIG welding
- connecting the electrode (or grounding/earthing) cable in rod electrode (MMA)
welding, depending on the type of electrode being used
ons (e.g. remote control, JobMaster TIG torch, etc.)
conventional welding torch
(22)
19
Rear view
(20)
(21)