Fronius TransTig 2200 Instructions De Service page 98

General remarks
(continued)
Utilisation for
intended purpose
only
Ambient
conditions
ud_fr_st_sv_00467 052002
- must not be removed
- must not be covered, pasted or painted over
For information about where the safety instructions and danger warnings are
located on the machine, please see the section of your machine's instruction
manual headed "General remarks".
Any malfunctions which might impair machine safety must be eliminated
immediately - meaning before the equipment is next switched on.
It's your safety that's at stake!
The power source may only be used for jobs as defined by the "Intended
purpose".
The machine may ONLY be used for the welding processes stated on the
rating plate.
Utilisation for any other purpose, or in any other manner, shall be deemed to
be "not in accordance with the intended purpose". The manufacturer shall
not be liable for any damage resulting from such improper use.
Utilisation in accordance with the "intended purpose" also comprises
- complete reading and following of all the instructions given in this manu-
al
- complete reading and following of all the safety instructions and danger
warnings
- performing all stipulated inspection and servicing work.
The appliance must never be used for the following:
- Thawing pipes
- Charging batteries/accumulators
- Starting engines
The machine is designed to be used in industrial and workshop
environments. The manufacturer shall not be liable for any damage resulting
from use of the machine in residential premises.
Likewise, Fronius will accept no liability for defective or faulty weld seams.
Operation or storage of the power source outside the stipulated range is
deemed to be "not in accordance with the intended use". The manufacturer
shall not be liable for any damage resulting herefrom.
Temperature range of ambient air:
- when welding: - 10 °C to + 40 °C (14 °F to 104 °F)
- when being transported or stored: - 25 °C to + 55 °C (-13 °F to 131 °F)
Relative atmospheric humidity:
- up to 50 % at 40 °C (104 °F)
- up to 90 % at 20 °C (68 °F)
Ambient air: Free of dust, acids, corrosive gases or substances etc.
Elevation above sea level: Up to 2000 m (6500 ft)
II