The Set-Up Menu: Level 1; General Remarks; Level 1: Shielding-Gas Set-Up Parameters; Accessing - Fronius TransTig 2200 Instructions De Service

The set-up menu: Level 1

General remarks

The digital power sources come with a wealth of expert knowledge already built in! You
can retrieve and use any of the optimised parameters stored in the machine whenever
you wish.
The set-up menu makes it easy for you to get your hands on this expert knowledge - as
well as on a number of additional functions - and to adapt the parameters to many very
different types of welding task.
"Set-up menu: Level 1" contains all the set-up parameters that have an immediate effect
upon the welding process. The parameters are arranged in logical groups. Each of
these groups is called up by pressing a different combination of buttons.
On the following pages you will find a detailed description of the settings that can be
made in the set-up menu, and of the parameters that are available in it.

Level 1: Shielding-gas set-up parameters

Accessing

-
-
Important! The first parameter to be displayed is always the one that was the last to be
selected the last time the set-up menu was accessed.
Selecting and
-
altering the set-
up parameter
-
Saving and -
exiting
While pressing and holding the Store button (13), press the Gas-test button (14)
The first parameter is displayed (e.g. "GPr")
Select the desired set-up parameter with the parameter selection buttons (8) and
(9).
Alter the value of the set-up parameter with the adjusting dial (7)
Press the Store button (13)
52