Stryker SV2 Manuel D'utilisation page 49

Conducted
RF
IEC 61000-4-6
Radiated RF
IEC 61000-4-3
N N o o t t e e 1 1 : : At 80 MHz and 800 MHz, the higher frequency range applies.
N N o o t t e e 2 2 : : These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
N N o o t t e e 3 3 : : The ISM (industrial, scientific, and medical) bands between 0,15 MHz and 80 MHz are 6,765 MHz to 6,795 MHz;
13,553 MHz to 13,567 MHz; 26,957 MHz to 27,283 MHz; and 40,66 MHz to 40,70 MHz.
N N o o t t e e 4 4 : : Product complies immunity to proximity fields from RF wireless communication equipment per IEC 60601-1-
2:2014 Table 9.
KK-7500 REV 08
3 Vrms
6 Vrms in ISM bands
150 kHz to 80 MHz
3 V/m
80 MHz to 2.7 GHz
3 Vrms
6 Vrms in ISM bands
3 V/m
Portable and mobile RF
communications equipment
should be used no closer to
any part of S S V V 2 2 , including
cables, than the
recommended separation
distance calculated from the
equation appropriate for the
frequency of the transmitter.
Recommended separation
distance
D=(1.2) (√ P )
D=(1.2) (√ P )
80 MHz to 800 MHz
D=(2.3) (√ P )
800 MHz to 2.7 GHz
Where P is the maximum
output power rating of the
transmitter in watts (W)
according to the transmitter
manufacturer and d is the
recommended separation
distance in meters (m).
Field strengths from fixed
RF transmitters, as
determined by an
electromagnetic site survey,
a should be less than the
compliance level in each
frequency range. b
Interference may occur in
the vicinity of equipment
marked with the following
symbol:
45 EN