Switching On And Off And Choice Of Steering Position - Vetus FOLLOW-UP STEERING Manuel D'utilisation Et Instructions D'installation

2.2 Switching on and off and choice of
steering position
After switching on the power the LED at each steering position
will begin to flash every 1.5 seconds. The Follow-Up steering
system is now on 'stand-by'.
A steering position is activated by pressing the 'Stand-by'
switch once at this position. The LED at this position will
now be on continuously.
The LED will go out on the other, passive handles and the
'Stand-by' switch does not function there any more.
By pressing the 'Stand-by' switch at the active position again
both this handle and the others will revert to the 'Stand-by'
situation.
22
100901.02
LED flashes every 1.5 seconds
STAND-BY
Press the 'Stand-by' button
LED ON continuously
ACTIVE STEERING POSITION
LED ON continuously
Press the 'Stand-by' button
LED flashes every 1.5 seconds
STAND-BY
FOLLOW-UP STEERING
0
5 5
10 10
20 20
35 35
SET
FUM2010
FOLLOW-UP STEERING
0
5 5
10 10
20 20
35 35
SET
FUM2011
FOLLOW-UP STEERING
0
5 5
10 10
20 20
35 35
SET
FUM2012
FOLLOW-UP STEERING
0
5 5
10 10
20 20
35 35
SET
FUM2013
FOLLOW-UP STEERING
0
5 5
10 10
20 20
35 35
SET
FUM2010
Follow-Up Steering System Follow-Up Steering System