Technical Details; Control Unit - Vetus FOLLOW-UP STEERING Manuel D'utilisation Et Instructions D'installation

5

Technical details

General
Power supply
Current in stand-by

Control unit

Connections for:
- Operating handles
- Blocking switch for master steering position
- Autopilot
- Non-Follow-Up switch (joystick)
- On/off switch for non-Follow-Up switch
- Rudder feedback unit
Signal
- Reversible motor or solenoid valves
- Short circuit valve / clutch
- Warning buzzer
Length of connecting wire for rudder position signal
Protection level
Weight
Operating unit
Connection for:
- Rudder position indicator
Signal
Protection level, provided fitted in a panel
Weight
Follow-Up Steering System Follow-Up Steering System
: 12 / 24 Volt direct current
: 150 mA
: max. 3
: 1
: 1
: 1
: 1
: 5 Volt power supply
: 2.5 Volt -/+ 0.342 V, for +/- 45º rudder angle
: max. current 20 A
: max. current 5 A
: 1, max. 50 mA
: 10 m
: IP21
: 1.2 kg
: 12/24 Volt power supply
: 2.075 Volt +/– 0.889 V, for +/- 45º rudder angle
: IP65
: 0.65 kg
33
100901.02