Installing The Transmitter In The Pipe - Burkert 8041 Manuel Utilisateur

Installationandwiring
Horizontal mounting
Correct
Vertical mounting
Correct Incorrect
Fig. 9 : Filling the pipe
Correct Incorrect
Correct Incorrect
Fig. 10 : Air bubbles in the pipe
→
If necessary, use a flow straightener to improve measurement
accuracy.
Type 8041
Incorrect
fluid circulation
direction
fluid circulation
direction
8.2.2.

installing the transmitter in the pipe

→
Follow the recommendations on installation described in
§ 8.2.1 and in the manual for the S020.
→
Installing the S020 fitting in the pipe.
→
Insert the nut (see reference 3
→
Clip the ring (reference 2
5 Fig. 11 ).
→
Insert the transmitter (reference 1
the cable glands parallel to the pipe.
→
Tighten the nut (reference 3
1
Electrodes
2
3
5
4
Fig. 11 : Installation of the transmitter in the pipe
English
Fig. 11 ) on the fitting.
Fig. 11 ) into the groove (reference
Fig. 11 ) into the fitting, with
Fig. 11 ) on the transmitter by hand.
flow direction
19