Burkert 8041 Manuel Utilisateur page 29

Adjustmentandfunctionalities
Green LED:
.....
Flashes once per second:
the device is switched on.
flashing 1 to 5 times: indicates the
parameter displayed by the bar graph
Bar graph with 10 LEDs:
is used to view and set the parameters
for the transmitter:
- 1 LED on = 10% of the full scale
(or 10 seconds)
- In Read mode
LED flashing x times = x% of the full
scale (or x seconds)
- In Settings mode
LED flashing once = 1% of the full
scale (or 1 second)
Fig. 24 : Electronic board in the transmitter
Type 8041
1 2 3 4 5 6 7 8 9 10
Push
button
1 2 3 4 5 6
4...20 V+ V- PE Pls+Pls-
Switches 1 to 5: transmitter parameter settings
(frequency of the main supply, measurement filter
level, measurement range)
Switch 6: not used
Red LED:
- : transmitter in Read
mode
- : transmitter in Set-
tings mode
.....
- flashing 1 to 5
times: error (see § 11.5)
English
27