Burkert 8041 Manuel Utilisateur page 43

Adjustmentandfunctionalities
Notation convention:
.....
Status of the red LED
Status of the green LED
FS = Full scale
to view low switching threshold
→
Press push button twice briefly.
Bar graph shows current low switching
threshold, 24% in the example (by default = FS)
to set the factors of ten for the low
switching threshold
After 2 s, transmitter in Settings mode:
Fig. 39 : Setting the relay switching thresholds, part 1
Type 8041
0 100% FS
1 2 3 4 5 6 7 8 910
A
Transmitter in Read mode?
.....
YES
to view high switching threshold
→
Bar graph shows current high switching
threshold, 82 % in the example (by default = FS)
to set the factors of ten for the high
switching threshold
→
Press and hold the push
button.
After 2 s, transmitter in Settings mode:
See general diagram
NO
Configuration § 10.3
Press push button briefly three times.
0
100 % FS
1 2 3 4 5 6 7 8 910
B
English
41