Burkert 8041 Manuel Utilisateur page 38

A
to calibrate automatically
→
Briefly press push button.
Calibration in progress
End of calibration: Red LED
goes off?
YES
Full scale value stored
Go back to Read mode
.....
Fig. 31 : Calibration of the full scale, part 2
36
NO
Red LED flashes:
4 times: fluid velocity < 2 m/s
5 times: fluid velocity > 10 m/s
The full scale has not been calibrated
→
Press push button for 2 s.
Go back to Read mode using the
full scale selected or calibrated
previously.
English
B
to select the other cali-
bration operation
→
Press and hold the push
button until...
...bargraph goes back to
step 1, Fig. 30
Type 8041
Adjustmentandfunctionalities
C
to go back to Read mode
→
Wait 10 s.
Go back to Read mode without con-
firming the selection displayed.