Installation In The Pipe - Burkert 8041 Manuel Utilisateur

WarnIng
Risk of injury due to non-conforming installation.
• The electrical and fluid installation can only be carried out by
qualified and skilled staff with the appropriate tools.
• Install appropriate safety devices (correctly rated fuse and/or
circuit-breaker).
• Respect the installation instructions for the fitting used.
Risk of injury due to unintentional switch on of power supply
or uncontrolled restarting of the installation.
• Take appropriate measures to avoid unintentional activation of
the installation.
• Guarantee a set or controlled restarting of the process subse-
quent to any intervention on the device.
WarnIng
Risk of injury if the fluid temperature/pressure dependency is
not respected.
• Take the fluid temperature/pressure dependency into account
according to the nature of the material of the fitting used (see
Fig. 5 and Fig. 6 ).
16
English
Type 8041
Installationandwiring
8.2.

installation in the pipe

danger
Risk of injury due to high pressure in the installation
• Stop the circulation of fluid and depressurize the pipes before
loosening the process connections.
Risk of injury due to high fluid temperatures.
• Use safety gloves to handle the device.
• Stop the circulation of fluid and depressurize the pipes before
loosening the process connections.
Risk of injury due to the nature of the fluid.
• Respect the regulations on accident prevention and safety relat-
ing to the use of aggressive fluids.