Burkert 8041 Manuel Utilisateur page 31

Type 8041
Adjustmentandfunctionalities
1
Current switching
mode*
short press
Current low switching
threshold*
short press
Current high switching
threshold*
short press
Current delay before
switching*
2
short press
* If no action for 10 s, the device goes back to Read mode, using the parameters from the previous setting.
Relay
Hysteresis mode
alternately
Hold
Window mode
> 2 s
Hold > 2 s
Hold > 2 s
Hold > 2 s
X
Release when
desired function is
displayed*
......
Unit increment: LED The LEDs then come
flashes up to 9 times on one after the other
(increment in factors
of ten)
Press and hold to set Unit increment: LED
the units flashes up to 9 times
Repeat the sequence if necessary
Confirm the choice displayed
Hold > 2 s
X
Release with the
desired factor of
ten is reached*
X
Confirm the value
Release
displayed
with the
desired unit is
reached*
Hold > 2 s
English
2
29