Problems Signalled By The Leds - Burkert 8041 Manuel Utilisateur

11.5.1.

problems signalled by the leds

status of
problem the bar status red led
graph
The device Off Flashes once
does not briefly every 2
respond seconds
The device Off Flashes twice
does not briefly every 2
respond seconds
The device Off Flashes twice
does not briefly every 3
respond seconds
The device Off Flashes twice
does not briefly every 4
respond seconds
48
status
status green current or
led frequency
output
Flashes once 22 mA and
per second 256 Hz
Flashes once 22 mA and
per second 0 Hz
Flashes once 22 mA and
per second 0 Hz
Flashes once 22 mA and
per second 0 Hz
English
Type 8041
Maintenanceandtroubleshooting
meaning / causes What to do
→
Measurement range
exceeded by more than
→
20%
→
Calibration of the "zero
flow" point has failed.
→
→
→
→
The device is out of order.
→
Calibration of the full
scale has failed because
→
fluid velocity < 2 m/s.
→
Clear the error by briefly pressing the
push button.
Consult the graphs (see § 8.2.1).
Clear the error by briefly pressing the
push button.
Check upstream/downstream dis-
tances (see § 8.2.1).
10.7).
Restart calibration (see §
If the error persists, contact your
Bürkert retailer.
Contact your Bürkert retailer.
Clear the error by briefly pressing the
push button.
Check the fluid velocity.
Restart calibration of the full scale
(see § 10.8).